The Plixus Gateway can be connected either to the WAN port, the LAN port or both. In case
both the WAN and LAN ports are used, two switches and two DHCP servers will be necessary.
In case SDI cameras are used, they should be connected to the SDI input 2 of the Plixus
Gateway.
In case you are using the T-CAM solution, a PC with the installed T-CAM software will need to
be connected to the system. Please refer to the T-CAM manual for more information.
The Chairman of the room needs to see the other participants during a meeting. A monitor
can be connected to the Plixus Gateway via the Display port HDMI adapter.
The LINE IN port of the Plixus Gateway should be connected to the AUX OUT 2 port of Plixus
AE-R.
The LINE OUT port of the Plixus Gateway should be connected to the AUX IN 2 port of Plixus
AE-R.
It is recommended to use the Monitor1 port to connect a monitor to the Gateway.
The Plixus Gateway must receive an IP address from the DHCP server installed on the
customer's network.
HARDWARE INSTALLATION
34
