Televic Confidea, Инструкция по установке и эксплуатации

Страница: 47 / 69

Confidea Wireless System Installation and User Manual
Televic Conference Systems 2008-09-05 47
‘ Clear Init List :
This will clear the init list and allow you to start
from scratch to build an init list.
12.4. Service
12.4.1. Logging
Log List
On this web page, a list of events are displayed that
occurred in the access point. This will help to
diagnose the system when necessary.
Start:
This button starts capturing the access point
events.
Stop:
This button stops capturing the access point
events.
Clear:
This button will clear the events that were
previously captured.
Use the MS Windows Copy-Paste facilities to export
the log list.
12.4.2. Update
Firmware RF module 1
Choose a file and click the update button to program
the firmware for the first RF module
Firmware RF module 2
Choose a file and click the update button to program
the firmware for the first RF module
Firmware Access Point
Choose a file and click the update button to program
the firmware for the access point
12.5. Encryption
12.5.1. Key Assignment
Introduction
To ensure a highly secured wireless system, the
Confidea system uses an encryption algorithm and
mechanism that is fixed and cannot be changed.
The information that is sent over the radio link is
encrypted with a key to make it inaccessible for 3
rd
party equipment. This key is default and identical for
all Televic units.
Security can be increased by adding a custom key,
that is specific to a certain set-up or installation. Only
the units and access point that share the same
encryption key are able to communicate with each
other. In this way, the system has become customer
exclusive and as a result an even higher degree of
security has been reached.
Encryption Key
Default Key:
When selecting this key, information over the
wireless link is encrypted, using the Televic
default key, used by all Televic equipment
Custom Key:
To further increase security, or to limit the
access to the Access Point only to a well
controlled number of delegate units, a custom
key can be generated and send to those units
that are allowed to join. The result of this action
is that only the units that know this key can
Caution:
Updating of firmware is not without risk
and should only be performed by, or
under the strict guidance of, qualified
personnel.