Televic Confidea, Инструкция по установке и эксплуатации

Страница: 39 / 69

Confidea Wireless System Installation and User Manual
Televic Conference Systems 2008-09-05 39
11.3. Setting the IP address
After you successfully accessed the WCAP for the
first time (refer to 11.2 ‘First time access’) you can
customize the TCP/IP settings to allow the
WCAP into
you own personal or company LAN network.
Select the “TCP/IP settings” sub tab in the
“Setup” menu (refer to Figure 11.9)
Figure 11.9: Confidea Setup menu
In the TCP/IP settings - screen you can modify
the TCP/IP settings of the
WCAP (refer to Figure
11.10).
1. The name of the installed conference system can
be customized.
2. The MAC address of the WCAP
3. The IP address mode determines how the WCAP
will get its IP address
Static: in this mode the IP address and
subnet mask is fixed and must be provided
in the appropriate fields.
DHCP: DHCP stands for Dynamic Host
Configuration Protocol and is a protocol
used by the WCAP to obtain the
parameters necessary for operation in an
Internet Protocol network automatically.
This protocol reduces system
administration workload, allowing the
WCAP to be added to the network with
little or no manual configuration.
4. Here you can enter the desired fixed IP address.
Only applicable in fixed IP address mode.
5. Here you can enter the desired subnet mask.
Only applicable in fixed IP address mode.
6. Press this button to save the modified values.
Figure 11.10: Screen TCP/IP settings
Note:
The new TCP/IP settings will only be
active after repowering the
WCAP
Note:
There must be a DHCP server on the
network that dynamically assigns IP
addresses when using the DHCP setting.
1
2
3
4
5
6