Televes T.0X Series, Руководство пользователя

Страница: 22 / 36

TWIN QPSK - PAL CI
22
The time taken to carry out the process will depend
on the number of QPSK multiplex services.
Finally, the LEDS indicate the following operating
conditions:
- Left LED (A) = Suffi
cient input signal level (for
guidance).
- Central LED (B) = QPSK demodulator hooked.
- Right LED (C) = MPEG
synchronisation
(synchronised audio and/or
video).
LEDs ON, indicate correct operation.
If one of them goes out, it indicates that something
is working wrong.
LED’s colour on the TWIN QPSK-PAL unit indicates
the hooking state of the QPSK demodulator for
both A and B modules (also shown by the B LED
status on the programmer):
- it will glow
green when the QPSK demodulator
is hooked in both modules .
- it will glow red when any of them is unhooked .
Remark : LED C will be OFF whenever the selected
program is not synchronised. This always
will happen when it is selected a scrambled
service for which the CAM does not allows
access
.
5.3. Saving Parameters
Once the desired value has been selected in any
of the menus (normal or extended), in order to
save the information, hold down the key for
approximately 3 seconds. The screen will display
the following:
Saving
settings and
restarting
...
Do not remove the controller until the message
disappears.
If confi guration data is modifi ed but not saved, the
previous confi guration is restored after 30 seconds
have elapsed, i.e. the new changes are cancelled.
Whenever the channel, input frequency or LNB
powering is modifi ed, and once the unit is hooked
on the QPSK signal, an automatic search of all
available services is performed. During analysis,
the following message is displayed:
ASERVICE
Processing
input
channels
SCAN TRANSP
Press or
to force
scan
This menu only appears when the unit is connected.
g. Language Menu
This fi nal extended menu allows the menu
languages to be selected (Spanish / English /
German):
LANGUAGE
English
Pressing the and keys changes the selected
language.
Remark : The list of menus that follows only can be
selected if the unit is is hooked to the QPSK
input signal
:
- Audio menu
- Audio by language/index (audio mode)
- Video format (letterbox, full-screen...)
- Subtitles Menu
- Program