manualshive.com logo in svg

Televes T.0X Series, Руководство пользователя

Поделиться
Скачать
Televes T.0X Series Скачать руководство пользователя страница 16

TWIN QPSK - PAL CI

16

b. Input Menu

The next menu allows selection of the following:
    - Input frequency (950-2150 MHz)
    - QPSK input baud rate (2-42.5 Mbaud)
    - LNB powering (0, 13, 17 Vdc; 22 Khz tone)

To modify the frequency, press   until the cursor 
shifts over the desired digit. Then change its value 
using keys   and  .
Whenever being in module A of the unit, save to 
set changes.

AINPUT

Freq:1451MHz

Baud:27.500

LNB:13V22kHz

In case of an input connector short-circuit 
condition (LNB powering option activacted), the 
front LED of the TWIN unit will fl ash until this 
condition dissapears.
Programmer’s LEDs status have a correspondance 
with the colour of the LED situated in the front of 
the TWIN QPSK-PAL unit. 
    -  LED glows GREEN indicating that both A and B 

modules of the TWIN unit are working fi ne. 

    -  LED glows RED indicating that something has 

happened in one of the modules (A or B) inside 
the TWIN QPSK-PAL unit.

If the output of one of the two modules (A or B) 
inside the TWIN unit is switched-OFF, its state will 
not be displayed on the frontal LED of the unit.

c. Service Menu

This menu displays the name of the service 
selected together with the number of services 
available in the multiplex: 

ASERVICE

1/5

TVE 1

Pressing the   and   keys changes the service 
selected.

d. Audio Menu

There are two modes of operation for selecting the 
audio service: language and index (see point 5.2.b 
“

Audio mode menu” in EXTENDED MENU

).

In 

audio language mode

, the two preferred audio 

languages can be chosen. The unit will search 
for the audio corresponding to the fi rst  selected 
language. If it cannot be found, the unit will then 
search for audio corresponding to the second 
selected language.
If neither of the two languages is found, the unit 
will select the fi rst audio channel of the program. 
In this mode of operation, the unit searches for 
audio corresponding to the desired language, 
even if that language is broadcasted on one of the 
dual audio service channels.

AAUDIO

Audio 1: fin

Audio 2: den

Stereo

List of available languages to be selected:

Содержание T.0X Series





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды