Televes T.0X Series, Руководство пользователя

Страница: 15 / 36

EN
15
5.1. Main Menu
To switch between A and B modules of the
TWIN unit, keep pressed the key until the A/B
indication stars to fl ash in the upper left corner of
the display. Then use keys and to select de
desired module.
Within
B module, changes of parameters are
updated after saving. Only changes in level are
updated instantly.
Within
A module, all changes of parameters are
updated instantly. Cloning functions are available
by pressing keys and .
These functions allow copying the TWIN QPSK-PAL
unit confi guration into the programmer and then
download it to another TWIN QPSK-PAL unit.
Please refer to Universal Programmer’s leafl et to
check all these cloning functions.
a. Output Menu
After selecting one of the A or B modules, the
fi
rst menu shows output frequency/channel
(depending on the operation mode) and output
level submenus.
AOUTPUT
Frequency:
471.25 MHz
Level: 00
5. - Instructions for use
Connect the controller to the front socket of
the module QPSK-PAL CI (“PRGM”). At fi rst, the
controller’s fi rmware version will appear:
PCT firmware
version
------------
V.5.03
Next, the fi rmware version of the QPSK-PAL CI
TWIN module is shown:
Unit
firmware
version:
V:3.21
The frequency ranges from 46 to 862 MHz.
The output level can be modifi ed from 99 down to
00, and set to OFF.
- Set 99 to obtain the max. oputput level.
- All the way down to the value 00, the output
level is attenuated 15 dB.
- Select OFF to switch-off the output. Whenever
being in module A of the unit, save to set the
OFF selection
To modify the frequency, press until the cursor
shifts over the desired digit. Then change its value
using keys and . Regarding decimal part of the
frequency, select a value out of the following four
ones:
=> .00 MHz
=> .25 MHz
=> .50 MHz
=> .75 MHz
To modify the output channel and its level, press
until the cursor shifts over the desired digit. Then
change its value using keys and .
Whenever being in module B, it is not necessary to
save to set the change.
AOUTPUT
Channel: 21
(471.25 MHz)
Level: 99
To switch between frequency mode and channel
mode, consult
EXTENDED MENU in paragraph 5.2 .