Televes MTD 120 Скачать руководство пользователя

Страница: 22 / 54

123

ENGLISH

TV & SAT Level Meter MTD 120

User Manual

4.9.2.- TV Mode Functions Menu

In TV operation mode, press key ENTER [5] to access the functions menu of the TV mode:

Figure 11.- TV mode functions menu.

Use keys

[6] to choose the different functions: pressing key

active option moves upwards while pressing key

active option

moves downwards. The downwards or upwards facing arrow at the bottom or top-left hand side of the functions menu indicates there are

more menus which can be accessed by pressing keys

[6].

Below we describe the use of each function and its range of values.

4.9.2.1.- Selection of the RF Band: (Band switching)

Permits to switch from terrestrial (5-862 MHz) to satellite band (920-2150 MHz) and vice versa.

4.9.2.2.- Selection of the TV System and Standard (System & Standard)

This function enables the television system and standard to be changed. The standards which can be selected depend on the band in use

(terrestrial or satellite channels). To change the standard access the TV mode functions menu, then use keys

[6] to select the System

& Standard function and press key ENTER [5]. A fold down menu will appear listing the following options:

Terrestrial bands

Satellite band

PAL-B/G

PAL

PAL-D/K

SECAM

PAL-I

NTSC

PAL-M

Digital

PAL-N

SECAM-B/G

SECAM-L

SECAM-D/K

NTSC-M

Digital

Use keys

[6] to select the desired standard and press key ENTER [5] to activate it.

If a digital channel is selected, whether terrestrial or satellite, for the measurement of the level and the carrier-to-noise ratio to be correct,

the bandwidth of the channel must be defined, using the Channel BW function of the functions menu.

The following table shows the features of the analogue terrestrial channel standards.

FUNCTIONS

Band switching

System & Standard
Battery & Lnb
Data logger
Clock
Input video

FUNCTIONS

Band switching
System & Standard

Battery & Lnb

Data logger
Clock
Input video

Содержание MTD 120























































Результаты поиска

Содержание MTD 120

Отзывы:

Похожие инструкции для MTD 120

Бренды по названию

Популярные бренды

Televes MTD 120, Руководство пользователя

Результаты поиска

Содержание MTD 120

Отзывы:

Похожие инструкции для MTD 120

Бренды по названию

Популярные бренды