User Guide -
EZMesh Full Duplex Mesh Network Access Point
Mesh Wireless Channel (Backhaul)
Channel/Frequency. This field identifies which operating frequency will be used. The
selection is set automatically by the MeshAP unit based on the environmental conditions.
MeshAPs associated with a Mesh Manager unit will automatically calibrate its channel to
reduce interference between MeshAPs on the mesh network.
Mesh Wireless Security (Backhaul)
Mesh Wireless Security
The Mesh Wireless (Backhaul) Security could only be configured at Mesh Manager unit
The default setting of the wireless security mode for the MeshAP unit is “WPA2.”
WPA2 Key
Step 1.
To automatically program the data encryption
Enter
a Passphrase in the
WPA2
Key
field.
Note:
It is important to remember the WPA2 key. This key needs to be applied for both
MeshAP units on the mesh network.
Step 2. Click
“Save Settings and Apply”
to apply the new setting.
WPA Key
Step 1.
To automatically program the data encryption
Enter
a Passphrase in the
WPA Key
field.
Note:
It is important to remember the WPA key. This key needs to be applied for both
MeshAP units on the mesh network.
TELETRONICS INTERNATIONAL, INC.
- 30 -
