User Guide -
EZMesh Full Duplex Mesh Network Access Point
12.
Use a level to verify that the top edge of the pole clamp subassembly is horizontal, and
tighten its adjustment screws.
Installing the EZMesh Access Point on a Wall
Figure 3-3
EZMesh with wall mounting kit installed
1.
Use the mounting plate as a template to mark four screw hole locations on your
mounting surface.
2.
Mount the mounting plate on the back of the enclosure with two screws.
3.
Mount the unit on the wall with 4 screws.
IMPORTANT:
The EZMesh must be mounted level. A circular level is attached to assist
with this.
TELETRONICS INTERNATIONAL, INC.
- 12 -
