LCD 63SE (VG) Keypad
User Manual
11
“Instant ArM” Mode for partition A
Instant arming means the user is allowed to stay in certain zone(s) after arming the system, but the
entrance zone is secured . The difference with the stay arming is that intrusion into the entrance zone
immediately generates an alarm .
ARMING VARIANT 1
for “Instant ARMING” of Partition A (with choosing the type of the ARMING
Mode - default setting):
ARMING VARIANT 2
for “Instant ARMING” of Partition A (without choosing the type of the ARM-
ING Mode - programmed from the installer):
ARMING VARIANT 3
for “Instant ARMING” of Partition A (quick ARMING without user code, but
with choosing the ARMING Mode type - default setting):
ARMING VARIANT 4
for “Instant ARMING” of Partition A (quick ARMING without user code and
ARMING Mode type - programmed from the installer):
At the end of the “Instant ARM” procedure, regardless of the used
arming variant, the icons of “Partition A” and “door” are ON . The
icon “man” is ON in the Partition A . The number(s) of the bypassed
zone(s) are missing, only the brackets around them are visible .
* To the user code are assigned rights to operate with Partition A, otherwise the system will reject
the operation.
Arming of partition B
ARMING of the Partition В in the system is done in the same way, as shown above for the Partition
A, but the user presses the
button .
The user must have a valid code for Partition B!
When the system is used to protect two independent sites, it is possible also to arm Partition A in one
ARMING Mode and Partition B in another ARMING Mode .
code
*
code
*
