20
LCD 63SE (VG) Keypad
User Manual
Pressing a numeric button alternatively switches over the state of the chime from disabled to en-
abled .
The selected programming is confirmed by pressing the
button . By default the chime is
disabled .
See also the example for chime enable / disable from User - page 15 .
Zone Bypassing from Manager
To execute a bypass operation the manager is required to enter a valid code:
Pressing a numeric button bypasses the respective zone . The zone number is surrounded by the
“(
-
)” icon . Pressing the same key once again restores the zone bypass . The “(
-
)” icon is removed .
Pressing
confirms the selection.
See also the examples for zone bypassing from User - page
15 .
Setting the Clock
To set the clock the manager is required to enter his personal code .
Setting the Date
To set the date the manager is required to enter his personal code .
Adding a Proximity card
To use proximity cards the system has to be equipped with a proximity card reader .
User no 01 - 20 or
Manager Address 2x
2 beeps
Deleting a Proximity card
User no 01 - 20 or
Manager Address 2x
2 beeps
code
code
code
code
code
2 beeps
new time (HH:MM)
2 beeps
new date (DD:MM)
