Teletek electronics CA60Plus, Руководство по установке, Страница: 29 / 32

RESET Parameters
29
TeleTek
CA60Plus Installation Manual
APPENDIX A
RESET Parameters Table
PROGRAM MENU ADDRESS LED 1 LED 2 LED 3 LED 4 LED 5 LED 6
LOOP TYPE 10 DUAL - LED1 to LED6 do not light ALARM - LED1 to LED6 light
ZONE 1 11 ! Entry/Exit ALARM PANIC TAMPER FIRE MEDICAL
ATTRIBUTES ZONE 1 " FOLLOW DOUBLE PART1 PART2 CHIME FAST
ZONE 2 12 ! Entry/Exit ALARM PANIC TAMPER FIRE MEDICAL
ATTRIBUTES ZONE 2
"
FOLLOW DOUBLE PART1 PART2 CHIME FAST
ZONE 3 13 ! Entry/Exit ALARM PANIC TAMPER FIRE MEDICAL
ATTRIBUTES ZONE 3 " FOLLOW DOUBLE PART1 PART2 CHIME FAST
ZONE 4 14 ! Entry/Exit ALARM PANIC TAMPER FIRE MEDICAL
ATTRIBUTES ZONE 4 " FOLLOW DOUBLE PART1 PART2 CHIME FAST
ZONE 5 15 ! Entry/Exit ALARM PANIC TAMPER FIRE MEDICAL
ATTRIBUTES ZONE 5 " FOLLOW DOUBLE PART1 PART2 CHIME FAST
ZONE 6 16 ! Entry/Exit ALARM PANIC TAMPER FIRE MEDICAL
ATTRIBUTES ZONE 6
"
FOLLOW DOUBLE PART1 PART2 CHIME FAST
PGM 1 21 ! ALARM PANIC TAMPER FIRE FIRE/RST ON/OFF
"
MEDICAL PS/bypass AC LOSS BAT LOW FUSE Pol+ / -
PGM 2 22 ! ALARM PANIC TAMPER FIRE FIRE/RST ON/OFF
"
MEDICAL PS/bypass AC LOSS BAT LOW FUSE Pol+ / -
PGM 3 23 ! ALARM PANIC TAMPER FIRE FIRE/RST ON/OFF
"
MEDICAL PS/bypass AC LOSS BAT LOW FUSE Pol+ / -
SIREN OUTPUT 24 ALARM PANIC TAMPER FIRE/ALW
EXIT TIME 30 0-9 SEC 10-19 SEC 20-29 SEC 30-39 SEC 40-49 SEC 50 - 59 SEC
ENTRY TIME 31 0-9 SEC 10-19 SEC 20-29 SEC 30-39 SEC 40-49 SEC 50 - 59 SEC
BELL TIME 32 1 MIN 2 MIN 3 MIN 4 MIN 5 MIN 6 MIN
BELL DELAY 33 1 MIN 2 MIN 3 MIN 4 MIN 5 MIN 6 MIN
SET WITH CODE 40 NO - LED1 to LED6 do not light YES - LED1 to LED6 light
USER CODE 1 41 UNSET FULSET PARTSET1 PARTSET2 LOG BYPASS
USER CODE 2 42 UNSET FULSET PARTSET1 PARTSET2 LOG BYPASS
USER CODE 3 43 UNSET FULSET PARTSET1 PARTSET2 LOG BYPASS
USER CODE 4 44 UNSET FULSET PARTSET1 PARTSET2 LOG BYPASS
USER CODE 5 45 UNSET FULSET PARTSET1 PARTSET2 LOG BYPASS
USER CODE 6 46 UNSET FULSET PARTSET1 PARTSET2 LOG BYPASS
MANGER ACCESS 47 NO - LED1 to LED6 do not light YES - LED1 to LED6 light
ENGINEER CODE 50 DIGIT 1 DIGIT 2 DIGIT 3 DIGIT 4
RESET ENABLE 51 NO - LED1 to LED6 do not light YES - LED1 to LED6 light
DEFAULT SETTINGS 52 Press the keys from 1 to 6 consequently and confirm by ENTER
PART. RESET 53 Press the keys from 1 to 6 consequently and confirm by ENTER
54 to 89 address indication, concerning the communicator parameters, is hexadecimal, the LEDs 3,4,5,6 are
used (Lower BIT - LED 6)
TEL No PC FOR UDL
PC ID FOR UDL
PANEL ID FOR UDL
CALL BACK
NO - LED1 to LED6 do not light YES - LED1 to LED6 light
No OF RINGS
ANSW. MACHINE
NO - LED1 to LED6 do not light YES - LED1 to LED6 light
TEL No 1 60 Max phone number lenght 16 symbols, pause=ON+2, DTMF =ON+1
PANEL ID 1 61 3 or 4 digits (depending on the report 3 х or 4 х )
REPORT 1 62 The report number included in the applied table is entered
х 1/ х 2 63 x2 - LED1 to LED6 do not light x1 - LED1 to LED6 light
TEL No 2 64 Max phone number lenght 16 symbols, pause=ON+2, DTMF =ON+1
PANEL ID 2 65 3 or 4 digits (depending on the report 3 х or 4 х )
REPORT 2 66 The report number included in the applied table is entered
х 1/ х 2 67 x2 - LED1 to LED6 do not light x1 - LED1 to LED6 light
WAIT DIAL TONE 68 NO - LED1 to LED6 do not light YES - LED1 to LED6 light
59
4 digits. Default 1234
4 digits. Default 1234
Max phone number lenght 16 symbols, pause=ON+2, DTMF =ON+1
1 digit. (0 to 9)
56
57
58
54
55