Teletec international Minicom 6000, Руководство пользователя

Страница: 36 / 87

Using HCO in Direct Connect
If you want to type to the other person and hear the reply, do the
following:
1. Tell the other person you want to use HCO by typing ‘HCO
PLEASE GA.’ Check that they say ‘OK’ before continuing.
2. Pick up the telephone handset.
3. Hang up the Minicom 6000 by Pressing the Hangup key
( + /
HANGUP
) and then pressing . You will not lose the
call as you have the telephone handset in your hand. You will see
MINICOM 6000
on the display.
4. When the other person has finished speaking, put the handset onto
the acoustic cups on the Minicom 6000 with the telephone lead
going off to the left.
5. Type your reply, unless you made the call to Typetalk. If you
made the call to Typetalk, wait for
MINICOM 6000
to disappear
from the display. You can then type your reply.
6. Repeat steps 2 to 6 each time you want to listen.
7. Be sure to hang up both the telephone and the Minicom 6000
when you finish your call.
Using VCO or HCO in Acoustic Mode
If you do not have your Minicom 6000 directly connected to the
telephone line, you can still make VCO and HCO calls
in Baudot,
Turbo Code or EDT by doing the following:
1. Tell the other person that you want to use VCO (or HCO). Check
that they say ‘OK’ before continuing.
2. Pick up the telephone handset and speak (or listen).
3. When you finish speaking (or listening), return the handset to the
acoustic cups on the Minicom 6000 with the telephone lead going
off to the left.
4. Wait for text to appear on the display (or type).
5. Repeat steps 2 to 4 each time you want to speak (or listen).
Y 2 Ctrl
VCO AND HCO CALLING • 33