Teletec international Minicom 6000, Руководство пользователя

Страница: 14 / 87

SETUP
SETUP • 11
The Minicom 6000 is simple to set up. You will need a mains power
socket to plug in the AC adapter and either: (1) a connection to a
standard telephone line or, (2) access to a telephone.
The best way to use the Minicom 6000 is to plug it into a standard
telephone line. This is called direct connect. See
Selecting a Location
below for more information on direct connect. If you cannot plug the
Minicom 6000 into a standard telephone line, you can also make and
answer calls by placing a telephone handset in the Minicom 6000’s
acoustic cups.
Selecting a Location
The Minicom 6000 requires a standard (analogue) telephone line, the
kind found in most homes. Some businesses use digital telephone
systems. To use the Minicom 6000 with a digital system, use only the
acoustic cups. Do not connect the Minicom 6000 directly to the
telephone line of a digital telephone system. If you wish to use direct
connect, some modifications can be made to the digital system. If you
are not sure of the type of telephone line you are using, contact your
telephone installer.
Select a location to set up the Minicom 6000 where:
✔
There is a mains power socket nearby
✔ There is a phone jack nearby
✔ Cords will not cross walkways
✔
The Ring Indicator is easily visible
✔ The surface it is set on is stable
✔ The area is protected from excessive heat or humidity
CHAPTER
2