Teleste EASI IP Series Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 44

Teleste EASI IP Series Скачать руководство пользователя страница 32

Confi g-ts level

On confi g-ts level the user is able to change device’s video interface settings.
Confi g-ts level is activated by entering command video transport-stream (or v t)
on confi g level --> “

IPx(config-ts)#

” text appears on the screen. Entering ?

displays a list of commands for confi g-ts level. To read device settings, the user
must return to enable level by entering command end (or en).

Commands:
end (en) - Back to enable level
exit (ex) - Back to confi g level
ip address (i a) [IP address] - BBE: Set destination IP address or multicast group;
BBD: Set video multicast group to join (blank for unicast)
ip port (i p) [0-65535] - Set UDP port number
ip qos-level (i q) [0-4] - Set quality-of-service level
ip time-to-live (i t) [0-255] - Set time-to-live (TTL) value
latency high (l h) - Set video latency to value high
latency low (l l) - Set video latency to value low
no ip address (n i a) [IP address] - Clear destination IP address or multicast
group (BBE), stop listen an unicast transport stream (BBD)
no ip qos-level (n i q) [level] - Disable quality-of-service (0)
no shutdown (n s) - Enable video encoding/decoding
pid audio (p a) [0-8191] - Set audio PID
pid pcr (p pc) [0-8191] - Set PCR PID
pid pmt (p pm) [0-8191] - Set PMT PID
pid video (p v) [0-8191] - Set video PID
quit (q) - Back to confi g level
shutdown (s) - Disable video encoding/decoding
test picture always-on (t a) - Enable test picture
test picture on-error-delay (t o) [1-65535] - Delay for enabling test picture in
seconds when video is missing
video bitrate (v b) [bitrate] - Set video stream bitrate to 3000 (3), 4000 (4),
5000 (5), 6000 (6), 7000 (7) 8000 (8), 9000 (9) or 10000 (10) kbps
video format (v f) [format] - Set video format to ntsc (n) or pal (p)
video gop-format (v g) [format] - Set video GOP format to i-only (i-), ibbpbbpbb
(ibb), ibpbpbpbp (ibp) or ipppppppp (ip)
video input (v i) [format] - Set video input format to composite (c) or s-video (s)

Picture 41.

Confi g-ts level’s “?” view (BBD).

IPx(config-ts)#
end End current mode and down to previous mode
exit Exit current mode and down to previous mode
ip Set IP parameters
latency-mode Set latency mode
no Negate a command or set its defaults
pid Set transport stream pids
quit Exit current mode and down to previous mode
shutdown Disable video decoding
test-picture Set test picture parameters
video Change video settings
IPx(config-ts)#

Note! Only in BBE.

Note! Only in BBD.

Note! Only in BBE.

Note! Only in BBD.

Note! Only in BBE.

Note! Only in BBE.

Note! Only in BBD.

30

BLUEbox series CLI user manual rev002

«
...
30
31
32
33
34
...
»

Содержание EASI IP Series













































Отзывы:

Нет отзывов