Connection methods - Hyper Terminal
1. Start the Windows Hyper Terminal program (in Windows by
choosing -> Start/Programs/Accessories/Communications/
Hyper Terminal). Wait until the following “Connection
Description” window appears on the screen (see picture 27).
2. Enter a name for connection, e.g. “EASI
™
IP Management” and
click OK button to continue. The following “Connect To”
window appears on the screen (see picture 28).
3. Choose COM port where the RS232 cable is connected, e.g.
COM1 port and click OK button to continue.
The following “COM1 Properties” window appears on the
screen (see picture 29). Set here the values as described in
table 9. Click OK button to continue.
The
“EASI
™
IP Management” window appears on the screen
(like picture 30 without text).
4. To activate the terminal connection fi rst press Enter -->
“
ipx login:
” appears on the screen. Enter the required user
name and the password (see table 8 on page 8 for User groups).
The terminal connection to BLUEbox device is now completed
and you can now use the CLI commands to management the
device. The Hyper Terminal connection can be terminated by
selecting File/Exit, Alt+F4 or clicking x on the right upper
corner of Hyper Terminal window.
Picture 27.
Naming a terminal
connection.
Picture 28.
Selecting COM port.
Picture 29.
Settings for COM port.
Setting Value
Emulation
VT100, VT102 or ANSI
Protocol Serial
Baud rate
19200
Data bits
8
Parity None
Stop bits
1
Flow control
None
Table 9.
Port settings to terminal connection.
Command Line Interface - CLI
Picture 30.
The Windows Hyper terminal program’s window view.
When the CLI is activated, “
ipx>”
text appears on the screen.
BLUEbox series CLI user manual rev002
21