Teleste EASI IP Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 44

Teleste EASI IP Series Скачать руководство пользователя страница 27

Enable level

On enable level the user is able to view device settings
(and on admin rights it is also possible to update the device software version).
Enable level is activated by entering command enable (or en) on disable level
--> “

IPx#

” text appears on the screen.

Entering ? displays a list of commands for enable level.
CLI session is terminated by entering command exit or quit.

Commands:
confi gure terminal (c t) - Activate confi g level
disable (d) - Back to disable level
end (en) - Back to enable level (no operation in this level)
exit (ex) -Terminate CLI session
ping (p) [IP address] - Ping IP address. CTRL-C stops ping
quit (q) - Terminate CLI session
reload (rel) - Reboot device
restart (res) - Restart services
show interface datachannel (s i d) - Display device’s all data channels settings
show interface datachannel (s i d) [1/2/3] - Display device’s data channel
1/2/3 settings
show interface fastethernet (s i f) - Display Ethernet status
show rmon alarm (s rm a) - Display confi gured RMON alarms
show rmon alarm (s rm e) - Display confi gured RMON events
show running-confi g (s ru) - Display device’s current settings
show sap (s s) - Display SAP settings
show transport-stream (s t) - Display video settings
show users (s u) - Display video unicast fi ltering status
show version (s v) - Display device’s hardware and software versions and
a serial number
update [ftp/http] [IP address] [fi le] (u f/h IP address fi le) - Update device’s
software version via defi ned ip adress

Picture 36.

Enable level’s “?” view.

IPx#
configure Enter configuration mode
disable Turn off privileged mode command
end End current mode and down to previous mode
exit Exit current mode and down to previous mode
ping Send echo messages
quit Exit current mode and down to previous mode
reload Halt and perform a cold restart
restart Perform a warm reboot and restart services
show Show running system information
update Update image from network server
IPx#

Note! Only in
administrator rights.

BLUEbox series CLI user manual rev002

25

«
...
25
26
27
28
29
...
»

Содержание EASI IP Series













































Отзывы:

Нет отзывов