TELES VoIPBox BRI, Справочное руководство

Страница: 75 / 280

4 Configuration files
VoIPBox BRI Version 18.0.002 Page 75
Holidays
Up to 50 different dates can be set for night sections used by
holiday. The variable dd.mm sets the day and month in which
the night section is activated when the 8th bit is set in the bit-
mask (see Table 4.13
→
).
4.2.1.4 Controllers
This category defines the parameters that apply to the ports.
The individual ports are defined with the following parame-
ters.Ports set to the same type can have the same address. In
this case they will form a trunk group. If you change this pa-
rameter in the configuration, you must restart the system.The
Any defined Night sections must be set in the files
pabx.cfg and route.cfg . If there are no changes in these
sections, you must copy them from the [System] section.
The complete Subscriber section must appear in the
Night section of the pabx.cfg (see Chapter 4.2.4 Time-
Controlled Configuration Settings
→
). The active route(s)
( MapAll , Restrict and Redirect entries) must appear in the
Night section of the route.cfg (see
Chapter 4.3 Configuration File route.cfg
→
).
!
Table 4.14
pabx.cfg
: Controller Parameters
Controller<port>=<address> <type> <mode> <line_type> FCT UNIT:<unit> VAL-
UE:<value>
AUTOUP TRAP
<port> Defines the running (physical) port number.
<address> Defines the configured (virtual) port address. In the default configura-
tion, the BRI TE port is 9, and the BRI NT port is 10. The VoIP port is 40.
<type> Defines the connection type:
TE
external (Terminal Endpoint). All TE ports must be con-
figured together starting with port 1 on the left.
NT internal (Network Termination). All NT ports must be
configured together to the right of the TE ports.
VOIP VoIP module