Phoning through different Telecommunication Carrier
7.2 Set Routing
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
830⇓
Enter the digits 830.
∗
Press the star key.
0
Enter the digit 0.
∗
Press the star key.
1
or
2
Select the routing method. Enter:
1 for Direct Line Access with Subaddressing
or
2 for automatic dialing of the network carrier.
∗
Press the star key.
Ν
Enter: outside line access number 0, then number range for
which the routing should be valid. Your entry is, for example, 00
for all long-distance calls or 000 for all international calls.
∗
Press the star key.
Ν
Enter: outside line access number 0, then
either
Direct Line Access
:
the dial-in number
Automatic network carrier dialing
:
the carrier access prefix,
∗
and
the Carrier Identification Code
#
Press the pound key.
∆
Listen for the confirmation tone. Put the receiver down.
Example:
You would like to process all international calls through the
network carrier with the access code 1680:
∗
(
Π
) 830
∗
0
∗
2
∗
000
∗
016
∗
80
#
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
Page 55
