Call Forwarding
4.5.1 Call Forwarding I (unconditional) by Box for Current
Port
Call forwarding I is an
unconditional
call
forwarding. The called terminal device does
not ring because the call is
transferred
im-
mediately
.
Activate call forwarding I for a telephone
that is not busy or when you do not want to
be disturbed by calls. All calls go straight to
B when a call forwarding I for A to B is
switched on.
Υ
Lift the telephone receiver
at the port for which call forwarding
should be valid
. You hear the dial tone.
∗
Press the star key.
41
Enter the digits 41.
Ν
Enter the call number for the call forwarding destination as you
would when dialing from the box – this means beginning
with
outside line access
for numbers in the public net.
#
Press the pound key. Listen for the confirmation tone.
Incoming call for A
Unconditional
call forwarding
to B
Example:
You would like to switch a call forwarding unconditional from
the current port to port 13.
∗
41
13
#
Note:
When you set a block against incoming calls (section 4.7.1, page
29) unconditional call forwarding is switched off.
Delete:
In order to delete call forwarding enter the same key combina-
tion without destination call number.
Page 22
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998