Further Settings
Page 38
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
5.4 Service Indicator for Outgoing Calls / Answering Ma-
chine
The TELES.iPBX 8TR Box and attached terminal devices accept calls with all
telephony/fax G3 service indicators. Outgoing calls use the service indicator ‘te-
lephony analog’. Thus, it should be possible to establish connections to most
common terminal devices.
Problems can arise for some fax machines at-
tached to PBXs when they can accept calls only
with the fax group 3 service indicator. In this
case, you can adapt the service indicator of the
fax machine’s port.
Type Meaning
1 Telephony
analog
2
ISDN telephony
3
Fax group 2 and 3
4 Answering
machine
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
051
Enter the digits 051.
Ν
Select the port for which you would like to change the service in-
dicator for outgoing calls.
Ν
Enter the number of the service indicator that you would like to
set.
#
Press the pound key. Listen for the confirmation tone.
∆
Put the receiver down.
Example:
Set service indicator type 3 ‘Fax group 2 and 3’ for port 12.
∗
(
Π
)
051 12
3
#
5.4.1 Special Settings for Answering Machine
Type 4 “answering machine” (see table above) is not a service according to
ISDN definitions. It is an extra feature that can be switched on in addition to
other service – e.g. for combination machines (telephone, answering machine
and fax in one device).
When you attach an answering machine, it is recommended that the service indi-
cator 4 be set for the appropriate port. This guarantees that the answering ma-
chine reliably switches off. Beyond that, you can pick up calls from this port
(section 4.4 page 18) although the answering machine has already reacted.
To deactivate the option, simply select option 1 (analog telephony).
