Further Settings
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
Page 49
5.15 Factory Settings
At delivery, the TELES.iPBX 8TR Box has the following default settings:
•
No MSNs assigned, drop port = port 11. All incoming calls arrive only at
port 11.
•
Different ring tones not active – i.e. same ring tone for internal and external
calls and callback on busy.
•
The on-hold tone is active for held connections.
•
TELES.iPBX 8TR Box is set for point-to-multipoint lines.
•
Charge counter set to 0.
•
No charge account.
•
Call list off.
•
Advice of charges off.
•
No PIN.
•
Device ID = 1
•
No dial-in number for remote configuration.
•
No speed dial numbers.
•
Call waiting permitted.
•
No call forwarding, no call distribution, no night service, no blocks acti-
vated.
Note:
Resetting has no influence on call forwardings that are activated
by the local exchange (see section 4.5, page 20) The PIN you’ve
set remains untouched when resetting to default.
You can delete all settings you’ve made and return the TELES.iPBX to its fac-
tory settings by entering the following:
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
037
Enter the digits 037.
#
Press the pound key. Listen for the confirmation tone.
∆
Put the receiver down.