Blocks
Page 34
2004 by TELES AG Berlin, Version 2.0/iPBX8TRe/6.02, Issue: May 1998
4.7.6 Direct Call
When the direct call function is activated the
TELES.iPBX 8TR Box dials a pre-
viously stored number immediately when the receiver is lifted. No further keys
need to be pressed.
This setting works like an intercom. It is suitable for children that cannot dial
numbers or can be used for telephones in visitor or conference rooms. Please
note that the only number that can be dialed is the direct call number stored for
the attached telephone.
Direct call can also be used as an
automatic outside line access
. For that you
would simply set a direct call to the outside line access number 0.
Υ
Lift the receiver. You hear the dial tone.
∗
Press the star key.
Π
Enter the PIN if necessary.
199
Enter the digits 199.
Ν
Select the number of the port for which the direct call should be
activated.
Ν
Dial the destination for the direct call e.g. the other port’s num-
ber or a complete external call number.
#
Press the pound key. Listen for the confirmation tone.
Example:
Set a direct call for extension 13 to port 14.
∗
(
Π
) 199
13
14
#
Delete:
Note that the
∗
and
#
keys to
control the TELES.iPBX 8TR
Box are not available
on a port while direct call is activated.
Deactivate the direct call function from an extension at which no
direct call is set. Enter the digits for the appropriate port there-
fore
without a destination call number
.
Note:
A direct call can be set for no more than seven ports. This
avoids blocking all further functions of the TELES.iPBX 8TR
Box.