Telegroup PCRL8/14, Руководство пользователя

Страница: 12 / 51

p. 12 / 43
incorrect power supply
incorrect installation
natural events (Lightning etc. ..)
It is recalled that modifications to safety devices and systems and any intervention other than ordinary and
extraordinary maintenance, carried out without the express written authorization of the manufacturer, render the
warranty void and relieve the manufacturer from any liability for damage caused by the defective product.
For all these reasons we advise our customers to always contact our Customer Service.
For all components not manufactured by the Seller the warranty conditions of the manufacturers are valid.
With the repair or replacement of any defective parts, the seller's obligation must be deemed to have been
fulfilled, thus remaining exempt from any claim for damages.
4 GENERAL DESCRIPTION OF THE PANEL
Sheet metal cabinet FE P02 epoxy powder coated gray RAL7035 with smooth / textured finish, equipped with
slots for forced cooling of the air.
Front door for access to the internal parts interlocked to the main switch by means of a door-locking
handle; closing by locks.
Blind flange for cable passage located on the upper / lower part of the equipment.
Fixing of the equipment to the floor / wall.
General switch-disconnector with door lock and (pre-opening microswitch: switches the capacitors off, via
contactors, before the isolator contacts open - optional -).
Other features see (APPENDIX).
4.1 Environmental Conditions
The machine is suitable for operating in environments that are:
• altitude not exceeding 1000 m s.l.m .;
• temperature between 0 ° C and + 40 ° C with relative humidity not higher than 85%
It is forbidden to use the machine in environments that are:
• Excessively dusty;
• in corrosive atmosphere;
• at risk of fire;
• in an explosive atmosphere.
4.2 Electromagnetic environment
The machine is designed to operate correctly in an industrial-type electromagnetic environment, within the limits of
Emission and Immunity provided for by the following harmonized standards:
CEI EN 61000-6-2 Electromagnetic compatibility (EMC) Generic standards - Immunity for industrial environments
CEI EN 61000-6-4 Electromagnetic compatibility (EMC) Generic standards - Emission for industrial environments