Wireless USB Adapter
User Manual
Equipamiento ADSL Inalámbrico
Page 23
Once all the parameters are
specified in the IP configuration,
you have finished creating a
wireless network profile..
Press “Finalizar” to save the
profile parameters.
The Monitor de red inalámbrica
will show the new profile in the
profile list.
If your network has a DHCP server or you are assigned automatically an IP address by
your Modem/Router, finalize the configuration of your profile with the “DHCP
activated as shown in the figure below:
Using this mode of IP addresses, your wireless client will receive your IP configuration
automatically. Before using this mode, make sure that the DHCP server is activated in
your Modem/Router. Now press the “Finalizar” button to return to the page
“Configuración de Perfiles”.
