TSA-200 Product Family Instructions for Immediate Use Version 1.01 December 2011
TSA-200 Instructions for Immediate Action
Normal
"Power"
LED is on with short OFF pulses.
Alarm
Condition
Action
Silencing
"Alarm" LEDs, internal buzzer and the Alarm Sounder are ON.
Take appropriate actions in accordance with the pertinent
instructions at your site, and notify the relevant entities.
To silence the alarm sounder press the
"Silence"
key.
Return to
Normal Operation
from Alarm
After taking the actions detailed above, restore the system to
normal operation by pressing the "
Reset
" key.
Automatic
Extinguishing
Extinguishing is performed automatically, without human
intervention (Except for triggering by Manual Trigger).
After extinguishing pulse ends, the TSA-200 enters the
"Extinguishing Fault" state.
Call the service representative listed below if the extinguishers
were activated, to replenish the extinguishant, restore extinguishing
capability and return to normal operation.
Fault
Condition
Action
Silencing
The General and specific "
Fault
" LEDs turns on, and the internal
buzzer sounds.
Take appropriate actions in accordance with the pertinent
instructions at your site.
Resolving the fault will automatically restore the system to normal
operating conditions.
To silence the internal buzzer press the "
Buzzer Off"
key.
Please refer to the TSA-200 Technical Manual for further information.
Zone
Description
1
2
Details of service representative, to be called in the event of fault;
Name: ____________________________________________________
Address: _________________________________________________
Phone: ___________________________________________________
Details of installing organization
Name: ________________________________________________________________
Address: ______________________________________________________________
Phone: ________________________________________________________________
This document shall be framed and placed adjacent to the control unit
