TeleEye VT3-16BA, Руководство по установке

Страница: 69 / 75

Eye
III+
I
nstallation Guide Page 62
Advanced Configuration - Modifying Settings
2. Through Internet/Intranet
Step 1: Make sure the transmitter is turned on and connect to your network with a valid IP address.
Step 2 : From Start menu, select Program Files Eye III+ Transmitter Configuration to run
the Configuration program. Then, the Configuration program should appear.
Step 3: Click on the General page. In the Connection group , select TCP/IP in the Device menu.
Step 4: Enter your transmitter’s IP address and port (default is 1024 ) to IP_address and Port column
respectively. At the same time, enter the administrator password at the Admin Pwd field (The
default one is “000000” ).
Step 5: Click the Connect button. Please wait until it shows Read Process --- Completed! Message
box . If Transmission unit not found! message is displayed, make sure that the IP of the
transmitter is valid and is turned on. And you can close the configuration program and redo
step 2.
Step 6: Now you can make the necessary changes on the fields provided.
Step 7:
After making changes, press the
Save and Exit
button to write the information back to the
transmitter.
Step 8: Please wait until it shows Write Process --- Completed! Message box . If Transmission unit
not found! message is displayed, make sure that the IP of the transmitter is valid and is
turned on. And you can close the configuration program and redo step 2.