TeleEye VT3-16BA, Руководство по установке

Страница: 58 / 75

Eye
III+
I
nstallation Guide Page 51
System Configuration and Installation
(1) Click “ Enable” the connection through sure LINK.
(2) Enter the sub-domain name (should be registered before using)
(3) Enter the Refreshing rate of 15 minutes (at least 15 minutes, recommended 30 minutes)
in the suitable fields provided.
(4)
Enter the DNS IP address in the server1 and server 2 fields at DNS services group
(Please ask your ISP to get this information)
(5) Ensure all settings are correct, then press the Save and Exit button.
Step 11: Please wait until it shows Write Process --- Completed! Message box . If Transmission
unit not found! message is displayed, make sure that the IP of the Transmitter is valid and
is turned on.
Step 12: After that the transmitter will automatically dial up and connected to the PPP mode.
When dial-up connection is successful, please open the “ Tele Eye III+ Reception Software
WRS3-AD ” and clicks the “Connect…” Icon; the following window will then be shown below.
(1)
(2)
(3)
(4)
(5)