Eye
III+
I
nstallation Guide
Page 25
System Configuration and Installation
Step 8:
Enter your transmitter’s IP address and port (default is
1024
), and your network’s subnet
mask to
IP, Port and Subnet Mask
fields at
Transmitter’s IP
group respectively.
Step 9:
Configure the
Registration Checking
and
Video Mode
settings.
Step 10:
You can
Enable
the Built-in Web Server so that you can see video through web browser
Step 11:
Ensure all settings are correct, then press the
Save and Exit
button
Step 12:
Please wait until it shows
Completed(
[baud rate]
)
message box, where
[baud rate]
shows
the serial port baud rate you are connecting between the PC and the transmitter. If
Transmission unit not found!
message is displayed, make sure that your cable
connection between the transmitter and your PC is well connected. And you can close the
configuration program and redo step 4.
Содержание VT3-16BA
Страница 1: ...Transmission Unit Installation Guide...
Страница 7: ......