manualshive.com logo in svg

Teledyne SeaBat T Series, Руководство оператора, Страница: 74 / 152

Поделиться
Скачать
Teledyne SeaBat T Series Скачать руководство пользователя страница 74

SYSTEM PERFORMANCE AND DATA TYPES

SeaBat T-Series Subsea Operator's Manual

Page 62

January 31, 2019

Version 7

7.4

Multi-Detect

17

Multi-detect is a feature which provides multiple detections 
within each beam, including the full water column. It allows 
the surveyor to capture enhanced detail from a single 
survey line over a complex feature, or ensure that full detail 
is captured of any object in the water column, even in noisy 
environments. Up to five detections may occur anywhere 
within each beam. (See also 

section 6.3.1 Multi-Detect 

Operation

.)

NOTE

Multi-detect is not equivalent to multiple soundings 
across a beam footprint on the seabed.

With the multi-detect feature you achieve:

Enhanced detail over complex, small, and fine 
objects.

Improved and faster decision making.

Easier and faster water column processing.

More project opportunities.

In the scenario in 

Figure 36,

 without multi-detect the sonar 

would detect either the anchor chain (blue dots) or the 
seabed (red dots) or flicker between the two features.

With multi-detect, the sonar can detect both the anchor 
chain and the seabed.

Figure 34: Standard Detection

Figure 35: Multi-Detect with Enhanced 

Detail on Quay Wall

Figure 36: Multi-Detect

7.5

X-Range

18

 Performance

X-Range is a feature that provides extended range performance at the full range of frequencies 
and also significantly improves system immunity towards external noise. The basis of the X-
Range feature is a frequency-modulated (FM) transmission combined with advanced signal 
processing techniques to extract the maximum possible performance from the system.

7.6

Full Rate Dual Head

19

The Full Rate Dual Head (FRDH) feature is superior to the standard dual head implementation by 
providing simultaneous pinging, whereas the standard dual head feature operates with alternate 
pings (see 

Figure 37

).

17

 Multi-detect is an optional add-on feature (see 

Table 1

).

18

 X-Range is an optional add-on feature (see 

Table 1

).

19

 FRDH is available as an upgrade to the Base license set (see 

Table 1

).

Содержание SeaBat T Series

























































































































































Отзывы:

Нет отзывов