manualshive.com logo in svg

Teledyne SeaBat T Series, Руководство оператора, Страница: 150 / 152

Поделиться
Скачать
Teledyne SeaBat T Series Скачать руководство пользователя страница 150

WARRANTY INFORMATION

SeaBat T-Series Subsea Operator's Manual

Page 138

January 31, 2019

Version 7

APPENDIX G

WARRANTY INFORMATION

G.1

Three-Year Limited Warranty

Teledyne RESON warrants your Teledyne RESON system against defects in materials and 
workmanship for a period of three years from acceptance of the system. During the warranty 
period, Teledyne RESON will, at its option, either repair or replace components which prove to be 
defective.

The warranty period begins on the day the system is accepted by the customer. Your Teledyne 
RESON system must be serviced by the Teledyne RESON office that sold it. The customer shall 
prepay shipping charges (and shall pay all duty and taxes) for products returned for service. 
Teledyne RESON shall pay for the return of the products to the customer, not including any duty 
and taxes.

NOTE

The three-year warranty applies to these standard sonar systems:

SeaBat T20-S

SeaBat T50-S

The warranty does 

not

 apply to:

Peripheral equipment (such as SVP 70 or 3

rd

 party hardware)

G.2

Exclusions

The warranty on your Teledyne RESON system shall not apply to defects resulting from:

Improper use.

Improper or inadequate installation or maintenance by the customer.

Unauthorized modifications, alterations, or repairs.

Accidental damage.

Improper storage or transportation.

Operation outside the environmental specifications of the product.

Improper site preparation or maintenance.

Opening of any parts of the equipment by anyone other than a Teledyne RESON 
authorized service facility.

Service provided by anyone but a Teledyne RESON authorized service facility (see 

section G.6 below

).

G.3

Warranty Limitations

The warranty set forth above is exclusive and no other warranty, whether written or oral, is 
express or implied. Teledyne RESON specifically disclaims the implied warranties of 
merchantability and fitness for a particular purpose.

Содержание SeaBat T Series

























































































































































Отзывы:

Нет отзывов