Q-Flex Satellite Modem Installation and Operating Handbook
6-74
•
Recall.
This allows a previously stored configuration to be selected and used in place of
the current configuration.
•
Erase.
This allows configuration memories to be deleted.
•
Download.
This is used to download one or more configuration memories from the
modem to a PC or equivalent.
•
Upload.
This is used to upload one or more configuration memories to the modem.
A default configuration memory called
LOAD_DEFAULTS
always exists. Recalling it will
reset the modem to its factory defaults. When LOAD_DEFAULTS is recalled from the web
user interface then the modem’s current M&C IP address, netmask, gateway,
takeaway control, Modem ID and passwords are all retained whereas when selected from
the front panel these go back to their factory defaults. This is done in order not to lose
remote control of the modem from the web user interface when using it.
LOAD_DEFAULTS
cannot be erased or overwritten.
Configuration memory names are restricted to alphanumeric characters.
Figure 6-27 Edit->Memories Screen
6.2.8.1 Edit->Memories->Recall Screen
The
Edit->Memories->Recall
screen (shown in
Figure 6-28
) displays all of the
configuration memories that are stored on the modem. A specific configuration memory
can be made active by selecting the associated
Recall
button. The
Delete
button can be
used to delete a configuration memory.