Teledyne Princeton Instruments PICam 5.x, Руководство программиста

Страница: 83 / 357

Chapter 5 Configuration APIs 83
5.1.1.23 PicamParameter
Data Type
PicamParameter
is defined as
enum
.
Description
PicamParameter
is the set of user-accessible hardware parameters.
Enumerator Definitions
Refer to Table 5-23 for enumerator definitions.
Table 5-23:
PicamParameter
Enumerator Definitions (Sheet 1 of 11)
Enumerator Description
PicamParameter_Accumulations
Controls the number of on-sensor accumulations
PicamParameter_ActiveBottomMargin Controls the inactive number of rows on the bottom.
PicamParameter_ActiveExtendedHeight
Controls the number of additional active rows that can be
used for storage.
NOTE: These rows cannot be imaged directly.
PicamParameter_ActiveHeight Controls the active number of rows.
PicamParameter_ActiveLeftMargin
Controls the inactive number of columns on the left.
PicamParameter_ActiveRightMargin Controls the inactive number of columns on the right.
PicamParameter_ActiveShutter
Selects the shutter via the
PicamActiveShutter
data
enumeration.
Refer to
Section 5.1.1.1, PicamActiveShutter , on page 71 for
additional information.
PicamParameter_ActiveTopMargin
Controls the inactive number of rows on the top.
PicamParameter_ActiveWidth Controls the active number of columns.
PicamParameter_AdcAnalogGain
Controls the electronic gain of the pixel digitization via the
PicamAdcAnalogGain data enumeration.
Refer to Section 5.1.1.2, PicamAdcAnalogGain , on page 71 for
additional information.
PicamParameter_AdcBitDepth
Controls the resolution of the pixel digitization in
bits-per-pixel.
PicamParameter_AdcEMGain
Controls the electromagnetic gain in terms of multiples.
PicamParameter_AdcQuality Controls the nature of pixel digitization via the
PicamAdcQuality
data enumeration.
Refer to Section 5.1.1.3, PicamAdcQuality , on page 72 for
additional information.
PicamParameter_AdcSpeed Controls the rate pixels are digitized, in MHz.
PicamParameter_Age
Reports the age measured in minutes.
PicamParameter_AnticiapteTrigger Uses an external pre-trigger to anticipate an external trigger.
PicamParameter_ApplicableStarDefectMap
ID
Reports the ID of the star defect map that could be used for
pixel correction.
PicamParameter_AuxOutput
Controls the auxiliary output gate pulse.
PicamParameter_BracketGating Enables bracket pulsing for intensified hardware.