Teledyne Princeton Instruments PICam 5.x, Руководство программиста

Страница: 17 / 357

Chapter 2 Introduction to PICam™ 17
Advanced
This sample illustrates features of
picam_advanced.h
.
Configure This sample illustrates how to change settings during camera setup as
well as online while polling for data.
EMGainCalibration This sample illustrates how to set up EM Gain Calibration.
For additional information about incorporating this sample into
production code, refer to
Appendix B, EM Gain Calibration Code
Sample .
Gating This sample illustrates how to set up repetitive and sequential gating.
Also demonstrates RF features on cameras which support RF
functionality.
Kinetics
This sample provides a sequence of API calls used to request
acquisition of image data using the kinetics window capture
mode.
The demo also illustrates how to make calls to utilize external
triggering of captures. The captured pixel data are stored to a raw data
file.
Metadata This sample enables metadata (i.e., Time Stamp(s) and Frame
Tracking.) It illustrates how to extract metadata from the data stream.
MultiCam This example opens multiple (i.e., 2,) cameras and collects data from
all simultaneously.
ParamInfo This sample accesses all parameter information for all hardware
parameters, and then prints them to the screen.
Poll This sample illustrates how to use the polling method for collecting
data by using
Picam_WaitForAcquisitionUpdate()
.
Rois This sample demonstrates the API for setting a simple single region of
interest. It also shows how to set up a camera for multiple regions of
interest and then acquires data for the given region(s).
SaveData
This sample acquires data synchronously and writes the returned data
buffer to disk.
Spectrograph
This sample moves the center wavelength asynchronously and waits
for it to complete.
WaitForTrig
This sample waits for an external trigger to start data acquisition.
Table 2-1: List of Sample Code Files Provided (Sheet 2 of 2)
Sample Name Description