Teledyne Linea GigE 2K Скачать руководство пользователя страница 93

Страница: 93 / 132

Linea GigE Series Camera

Operational Reference

•

Accessing the Linea GigE File Memory

•

Double-click the Linea GigE icon to access the camera home page as shown below (Windows IE

is used as the default browser).

•

The Linea GigE home page presents a short welcome message. Click on the file access button to

open a ftp client session, but currently there are no files distributed in the camera. Please go to

the Teledyne DALSA support web site to download the latest Sapera LT and Linea GigE

firmware.

Using the Linea GigE File Memory

Any or all of the Linea GigE file memory is usable by the user to store data. Folders can be created

and files copied to the camera (limited to available space). Any factory distribution files or folders

can be deleted to free addition memory.
To use available memory:

•

From the ftp access window (see previous screen capture) open the View drop menu and click

Open FTP Site in Windows Explorer.

•

Perform any file or folder operation as required. Close the Windows Explorer window when

done.

•

From the open FTP access window, click the refresh button to view changes. Note: The refresh

button must be clicked for each folder level to view any changes made.

Содержание Linea GigE 2K





































































































































Результаты поиска

Содержание Linea GigE 2K

Отзывы:

Teledyne Linea GigE 2K, Руководство пользователя, Страница: 93 / 132

Результаты поиска

Содержание Linea GigE 2K

Отзывы: