Teledyne Linea GigE 2K, Руководство пользователя, Страница: 31 / 132

Linea GigE Series Camera Operational Reference
•
29
Save Configuration UserSetSave Saves the current camera configuration to the user set
specified by the User Set Selector feature. The user
sets are located on the camera in non-volatile
memory. (W)
1.00
Beginner
Device Built-In Self Test deviceBIST Command to perform an internal test which will
determine the device status. (W)
1.00
DFNC
Beginner
Device Built-In Self Test
Status
deviceBISTStatus Return the status of the device Built-In Self test.
Possible return values are device-specific.
1.00
Beginner
Passed Passed No failure detected
Firmware update failed FirmwareUpdateFailure Last firmware update operation failed.
FPGA Cyclic Redundancy
Check Failed
FPGA_CRC_Failure FPGA cyclic redundancy check failed.
Unexpected Error Unexpected_Error Switched to recovery mode due to unexpected
software error.
Device Built-In Self Test
Status All
deviceBISTStatusAll Return the status of the device Built-In Self Test as a
bitfield. The meaning for each bit is device-specific.
1.00
DFNC
Beginner
Device Reset DeviceReset Resets the device to its power up state. (W) 1.00
Beginner
Device Temperature
Selector
DeviceTemperatureSelector Select the source where the temperature is read. 1.00
Beginner
FPGA Board FPGABoard Read FPGA Board temperature
Device Temperature DeviceTemperature The temperature of the selected source in degrees
Celsius
1.00
Beginner
DeviceID DeviceID Displays the device’s factory set serial number. 1.00
Invisible
Calibration Date deviceCalibrationDateRaw Date when the camera was calibrated. 1.00
DFNC
Invisible
Device Acquisition Type deviceAcquisitionType Displays the Device Acquisition Type of the product.
(RO)
1.00
DFNC
Invisible
Sensor Sensor The device gets its data directly from a sensor.
Device TL Type DeviceTLType Transport Layer type of the device. 1.00
Invisible
GigE Vision GigEVision GigE Vision Transport Layer
Device TL Version Major DeviceTLVersionMajor Major version of the device’s Transport Layer. 1.00
Invisible
Device TL Version Minor DeviceTLVersionMinor Minor version of the device’s Transport Layer. 1.00
Invisible
Power-up Configuration
Selector
UserSetDefaultSelector Selects the camera configuration set to load and make
active on camera power-up or reset. The camera
configuration sets are stored in camera non-volatile
memory. (RW)
1.00
Invisible
None None Keep Internal configuration.
Factory Setting Default Select the Factory Setting values as the Power-up
Configuration.
UserSet1
to
UserSet4
UserSet1
to
UserSet4
Select the user defined configuration as the Power-up
Configuration.
DFNC Major Rev deviceDFNCVersionMajor Major revision of Dalsa Feature Naming Convention
which was used to create the device’s XML. (RO)
1.00
DFNC
Invisible
DFNC Minor Rev deviceDFNCVersionMinor Minor revision of Dalsa Feature Naming Convention
which was used to create the device’s XML. (RO)
1.00
DFNC
Invisible
SFNC Major Rev DeviceSFNCVersionMajor Major Version of the Standard Features Naming
Convention which was used to create the device's
XML. (RO)
1.00
Invisible