Teledyne Linea GigE 2K, Руководство пользователя, Страница: 41 / 132

Linea GigE Series Camera Operational Reference
•
39
Line Mode LineMode Reports if the physical Line is an Input or Output
signal. (RO)
See Input Signals Electrical Specifications.
See Output Signals Electrical Specifications.
1.00
Expert
Input Input The line is an input line.
Output Output The line is an output line.
Input Line Detection Level lineDetectionLevel Specifies the voltage threshold required to
recognize a signal transition on an input line.
1.00
Expert
DFNC
Threshold for 3.3V LVTTL Threshold_for_3V3 A signal below 0.8V will be detected as a Logical
LOW and a signal greater then 2.4V will be
detected as a Logical HIGH on the selected input
line.
Threshold for 5V TTL Threshold_for_5V A signal below 0.8V will be detected as a Logical
LOW and a signal greater then 2.4V will be
detected as a Logical HIGH on the selected input
line.
Threshold for 12V Threshold_for_12V A signal below 2.0V will be detected as a Logical
LOW and a signal greater then 10V will be
detected as a Logical HIGH on the selected input
line.
Threshold for 24V Threshold_for_24V A signal below 4.0V will be detected as a Logical
LOW and a signal greater then 20V will be
detected as a Logical HIGH on the selected input
line.
Line Status LineStatus Returns the current status of the selected input or
output line. (RO)
1.00
Expert
False / True
Line Inverter LineInverter Controls whether to invert the polarity of the
selected input or output line signal.
1.00
Beginner
False / True
Input Line Debouncing Period lineDebouncingPeriod Specifies the minimum delay before an input line
voltage transition is recognizing as a signal
transition.
1.00
Beginner
DFNC
Line Electrical Termination lineElectricalTermination Controls if the electrical termination of the
selected line is enabled of disabled.
1.00
Expert
DFNC
Disabled Disabled Disabled electrical line termination for the
selected line.
Enabled Enabled Enabled electrical line termination for the selected
line.
Output Line Source outputLineSource Selects which internal signal or event driven pulse
or software control state to output on the selected
line. Note, the LineMode feature must be set to
Output. The List of supported output line sources
is product-specific. The Event Control section
provides details and timing diagrams for the
supported trigger modes.
1.00
Beginner
DFNC
Off Off Line output is Open
Software Controlled SoftwareControlled The OutputLineValue feature changes the state of
the output
Pulse on: Start of Frame PulseOnStartofFrame Generate a pulse on the start of the Frame Active
event
Pulse on: Start of Line PulseOnStartofLine Generate a pulse on the start of the Line Active
Pulse on: Start of Exposure PulseOnStartofExposure Generate a pulse on the ExposureStart event. This
option is typically used to trigger a strobe light.
Pulse on: End of Exposure PulseOnEndofExposure Generate a pulse on the ExposureEnd event. This
option is typically used to trigger a strobe light.
Pulse on: Start of Readout PulseOnStartofReadout Generate a pulse on the ReadoutStart event.
Pulse on: End of Readout PulseOnEndofReadout Generate a pulse on the ReadoutEnd event.
Pulse on: Valid Line Trigger PulseOnValidLineTrigger Generate a pulse on the LineTrigger event.
Pulse on: Invalid Line Trigger PulseOnInvalidLineTrigger Generate a pulse on the Invalid LineTrigger event.