Teledyne DALSA Piranha PC-30-02K60-00-R Скачать руководство пользователя страница 93

Страница: 93 / 96

Piranha Color Camera

Appendix D: Revision History

Revision

Number

Change Description

Preliminary release

-"rfs" commands substituted with "lfs" commands (no change to

command performance). "i" parameter removed from "wpc," "wfc,"

and "wil" commands descriptions. These commands use the "ssn"

command to indicate the storage set. Parameter 5 (PC set. Selects

transfer from PC) removed from command "ssn". This parameter is
not in the current cameras.

-Extensive updates throughout manual. Manual remains preliminary.

-Base and medium configuration timing tables updated.

-Product name revised from PC-30-02k40 and 04k40 to PC-30-02k60

and 04k60.
-Blue correction enable command and algorithm added.

-Revised and added information to the Generating a Test Pattern

section, page 60. Example test patterns added.

-Set Binning Horizontal (sbh) command replaced with Set Averaging

Horizontal (sah) command. Horizontal average replaces horizontal

binning.

-Added Warning 09: Changing this parameter (e.g. vertical binning)

has changed read out time and that is greater than the

internal

SYNC,

to table 10: Warnings and Errors.

-Revised base and medium configuration tables in section 2.6 Camera

timing, page 15. SOT command updated, sot 30 removed.
-Lens mount option M42x1 added to specifications and mechanical

sections.
-Revised FPN values added to the performance specifications table

for the 2k80 and 4k80 models, page 5.

-RoHS designation added, including camera model numbers.

-SOT 30 parameter removed from the Help screen description, page

22, the Data Ouput section, page 26, and from the list of all available
commands, page 79.

-"Pending" added to declarations of CE compliance in manual.

-Mechanical connector dimension revised.

-Blue correction affected pixels, revised in Appendix B.

-EMC declaration: "pending" stamp removed and fulfilled

requirements listed.

-Exposure mode 5 revised so that the timing signal for the green

exposure starts at the same time as CC2 Green PRIN rising edge. The
signal was starting too late. Page 31.

-Test conditions and notes for the performance and operating

specification, Section 1.1, combined.

-Operating specifications tables for both 2k and 4k models revised.

-Sensor responsivity graphs revised, Section 1.3.

-SOT 30 command added to camera. Base and medium configuration

tables updated on pages 19 and 21.

"Preliminary" designation removed.

Mechanical drawing revised showing sensor alignment measured
from tooling holes in the front plate. Teledyne DALSA logo added.

Содержание DALSA Piranha PC-30-02K60-00-R

































































































Результаты поиска

Содержание DALSA Piranha PC-30-02K60-00-R

Отзывы:

Teledyne DALSA Piranha PC-30-02K60-00-R, Руководство пользователя, Страница: 93 / 96

Результаты поиска

Содержание DALSA Piranha PC-30-02K60-00-R

Отзывы: