Teledyne DALSA Piranha PC-30-02K60-00-R Скачать руководство пользователя страница 13

Страница: 13 / 96

Piranha Color Camera

Hardware Interface: Connectors

and Timing

2.1 Installation Overview

When installing your camera, you should take these steps:
1.

Power down all equipment.

Following the manufacturer’s instructions, install the frame grabber (if applicable).

Be sure to observe all static precautions.

Install any necessary imaging software.

Before connecting power to the camera, test all power supplies. Ensure that all the

correct voltages are present at the camera end of the power cable. Power supplies
must meet the requirements defined in section 2.2.2 Power Connector.

Inspect all cables and connectors prior to installation. Do not use damaged cables

or connectors or the camera may be damaged.

Connect Camera Link and power cables.

After connecting cables, apply power to the camera.

Check the diagnostic LED. See the LED Status Indicator section below for an

LED description.

The camera powers on with a baud rate of 9600.

You must also set up the other components of your system, including light sources,

camera mounts, host computers, optics, encoders, and so on.

2.2 Input / Output Connectors and LED

The camera uses:



An LED to display the camera's status.



High-density 26-pin MDR26 connectors for Camera Link control signals, data

signals, and serial communications.



One 6-pin Hirose connector for power.

Camera Link Connector

Power Connector

Содержание DALSA Piranha PC-30-02K60-00-R

































































































Результаты поиска

Содержание DALSA Piranha PC-30-02K60-00-R

Отзывы:

Teledyne DALSA Piranha PC-30-02K60-00-R, Руководство пользователя, Страница: 13 / 96

Результаты поиска

Содержание DALSA Piranha PC-30-02K60-00-R

Отзывы: