Teledyne DALSA Piranha PC-30-02K60-00-R Скачать руководство пользователя страница 22

Страница: 22 / 96

Piranha Color Camera



9600 baud rate.



Exposure mode 2: Internal sync and exposure control.



RGB color selection.



Camera Link mode 5: base configuration, RGB, 8 bit output.

Note: The FPN and PRNU coefficients are factory calibrated at 0 dB gain setting 0. The
FFC calibration line rate is 400 Hz.

3.2 Rebooting the Camera

The reset command (

) reboots the camera. The camera starts up with the last saved

settings and baud rate used before reboot. Previously saved pixel coefficients are also

restored.

3.3 Baud Rate

Purpose:

Sets the speed in bps of the serial communication port.

Syntax:

sbr m

Syntax Elements:

Baud rate. Available baud rates are:

9600

(Default),

19200

57600

, and

115200

Notes:

Power-on rate is always 9600 baud.

The

(reset camera) command will

not

reset the camera to the

power-on baud rate and will reboot using the last used baud rate.

Example:

sbr 57600

3.4 Select Cable

Purpose:

Sets the cable parameters.

Syntax:

scb m

Syntax Elements:

Output compare value. Available values are:

255

Notes:

In medium configuration, both cables must be the same length.

Only one copy of this setting is saved in the camera (rather than
with each setting).

Using the

lfs

(load factory settings) command, the cable length

will be set to the factory default of

100

The cable parameter is a relational value. Increase the value for
longer cables, and decrease it for shorter ones.

Adjust the value until the test pattern (

svm 1

) is clean.

Example:

scb 75

3.5 Help

For quick help the camera can return all available commands and parameters through

the serial interface.

Содержание DALSA Piranha PC-30-02K60-00-R

































































































Результаты поиска

Содержание DALSA Piranha PC-30-02K60-00-R

Отзывы:

Teledyne DALSA Piranha PC-30-02K60-00-R, Руководство пользователя, Страница: 22 / 96

Результаты поиска

Содержание DALSA Piranha PC-30-02K60-00-R

Отзывы: