Teledyne DALSA Piranha PC-30-02K60-00-R Скачать руководство пользователя страница 50

Страница: 50 / 96

Piranha Color Camera

Calibrate Input LUT

Purpose:

Calibrates the current input look-up table for correcting non-

linearity in the analog chain (CCD sense node and analog-to-

digital conversion).

Syntax:

cil

Syntax Elements:

Notes:

This command calibrates all taps within the ROI for current

color (RBG does all).

To calibrate:

Place a white reference in front of the camera. This is similar to
a PRNU calibration.

Adjust the light level such that at maximum LUT line rate:

2K60 is equal to 10,501 Hz, and 4K60 is equal to 5,410 Hz.
Average output is less than 590 DN (12 bit) and at minimum

line rate average output is greater than 3,685 DN (12 bit)
In addition:

Use the

wil

command to write the LUT to non-volatile

memory.

Use the

eil

command to enable use of the LUT.

Use the

scl

command to select which colored taps to calibrate.

Use the

roi

command to limit the taps calibrated and to limit

which pixels are used for calibration. If a tap is not in the region

of interest, then it will not be calibrated.

Press spacebar to abort this command.
Rerun this command if the analog gain or operating temperature

changes.

Example:

Enable Input LUT

Purpose:

Enables or disables the use of the input look-up tables for the

correction of the analog chain non-linearity.

Syntax:

eil

flag

Syntax Elements:

Disable

Enable

Notes:

Coefficients must be created first with the

cil

command.

Setting saved with the

wfs

and

wus

commands.

Example:

Содержание DALSA Piranha PC-30-02K60-00-R

































































































Результаты поиска

Содержание DALSA Piranha PC-30-02K60-00-R

Отзывы:

Teledyne DALSA Piranha PC-30-02K60-00-R, Руководство пользователя, Страница: 50 / 96

Результаты поиска

Содержание DALSA Piranha PC-30-02K60-00-R

Отзывы: