Teledyne 7 RU Chassis, Руководство по эксплуатации, Страница: 49 / 144

Operations Manual, 7RU SSPA Chassis 208528 REV M 49
3.4 Fault Monitoring Setup Sub-Menu
This menu, shown in
Figure 3-6 , allows the user to select how the SSPA will handle fault con-
ditions.
3.4.1 BUC Fault
Allows the operator to select the Action and the Fault Logic for fault conditions associated
with the unit’s Block Up Converter. The operator can select the following Actions:
1.Fault ;
2.Alert ; 3.Fault + Mute ; or 4.Ignore . The following Fault Logic parameters are available:
1. High(BUC) ; or 2.Low .
3.4.2 Auxiliary Faults
Allows the operator to select the Action and the Fault Logic for fault conditions associated
with the Auxiliary connections. The operator can select from the following Actions:
1.Fault
(AUX) ; 2.Alert ; 3.Fault + Mute ; 4.Alert + Mute ; or 5.Ignore . The following Fault Logic param-
eters are available: 1.High(AUX) ; or 2.Low .
See
Section 2.1.2.7.1 for a description of how to mute the amplifier using the 4.Alert + Mute
option.
2.Com Setup 1.Sys Info 3.Operation 4.Flt. Setup 5.Options
1.BUC Fault
Main Menu
6.Redundancy
2. Aux. Faults 3. RFSw Faults 4.Fault Latch
1.Latch Enb. 2.Latch Dis.
5.Fwd RF / ALC
1.Fault 4.Ignore (RFSW) 3.Mute on Switch 2.Alert
1.Disable 3.High RF 4.ALC On 2.Low RF
1.Action (BUC) 2.Logic (BUC)
1.Fault (BUC) 4.Ignore 3.Fault+Mute 2.Alert
1.High (BUC) 2.Low
1.Action (AUX) 2.Logic (AUX)
1.Fault (AUX) 5.Ignore 3.Fault+Mute 2.Alert
1.High (AUX) 2.Low
5.Set Level
1.RF Level (dBm)
MENU ITEM
NOT ACTIVE
UNDER N+1 OPERATION
4.Alert+Mute 6.Back
1.Fault 3.Back 2.Alert
1.Fault (High RF) 3.Alert 2.Fault + Mute 4.Back
Figure 3-6: Fault Monitoring Setup Sub-Menu