Teledyne 7 RU Chassis, Руководство по эксплуатации, Страница: 45 / 144

Operations Manual, 7RU SSPA Chassis 208528 REV M 45
3.2.5.2 More (Traps and Time Settings)
This menu allows the user to set SNMP Trap settings, and also set the time of the internal
clock.
•
1.SetTrap — This selection allows the user to set the Settings Trap;
•
2.CondTrap — This selection allows the user to set the Conditions Trap;
•
3.TimeSet — This selection allows the user to set the time. Clock output format
is YY/MM/DD HH:mm. Only 24-Hour format is supported at this time. Press the
Up Arrow [ ▲ ] key to increment the value highlighted by the cursor. Press the
Down Arrow [ ▼ ] key to decrease the value highlighted by the cursor. Press the
Right Arrow [ ► ] key to move the cursor to the right; Press the Left Arrow [ ◄ ]
key to move the cursor to the left; Press the Enter key to accept.
•
4.TrapNMSIP — This selection allows the user to set the Trap NMS IP Address;
•
5.Back — This selection opens the menu items listed in Section 3.2.5.1 .
3.2.6 N+1 Control (Floating Master Mode)
This menu allows the user to set parameters relating to Floating N+1 Master operation.
This feature allows having a single point of control for an N+1 system Master Module. When
enabled, this mode will switch the N+1 Master Module serial and IP address to a dedicated
floating Master IP and serial address.
Without this function, a faulted Master Module in an N+1 system delegates its control privileg-
es to another unit, which has a different serial and IP address.
With this feature activated, the Master serial and IP address are reassigned to the new Mas-
ter Module and the former master unit restores its normal communication parameters.
This mode of operation allows having single M&C connection point bonded to a known IP and
Serial address, regardless which module in the N+1 system assumes the role of the Master
Module. In this mode, the user could maintain a remote connection to a single Master unit.
Simultaneous connections to other modules is optional.
SettingsSend:XX
ConditionsSend:XX
Set New Time (YY/MM/DD HH:mm)
YY/MM/DD HH:mm
TrapNMSIP:XXX.XXX.XXX.XXX