Teledyne 6000A, Руководство по эксплуатации

Страница: 10 / 94

1-2: Part I
1 Introduction Model 6000A
Teledyne Analytical Instruments
• A 2-line alphanumeric display screen, driven by microprocessor
electronics, that continuously prompts and informs the operator.
• High resolution, accurate readings of concentration from low
ppm levels through to 100%. Large, bright, meter readout.
• Versatile analysis over a wide range of applications.
• Microprocessor based electronics: 8-bit CMOS microprocessor
with 32 kB RAM and 128 kB ROM.
• Three user definable output ranges (from 0-1 ppm through
0-100 %) allow best match to users process and equipment.
• Calibration range for convenient zeroing or spanning.
• Auto Ranging allows analyzer to automatically select the proper
preset range for a given measurement. Manual override allows
the user to lock onto a specific range of interest.
• Two adjustable concentration alarms and a system failure alarm.
• Extensive self-diagnostic testing, at startup and on demand, with
continuous power-supply monitoring.
• RS-232 serial digital port for use with a computer or other digital
communication device.
• Analog outputs for concentration and range identification.
(0-1 V dc standard, and isolated 4–20 mA dc)
• Superior accuracy.
• Internal calibration (optional).
1.4 Control Unit Inner Control Panel
The standard 6000A Control Unit is housed in a rugged panelmetal
case with all remote controls and displays accessible from the front control
panel. See Figure 1-1. The front control panel has a digital meter, an alpha-
numeric Vacuum Fluroscent Display (VFD), and buttons for operating the
analyzer.