Teledyne Lecroy HDO9000 Скачать руководство пользователя

Страница: 45 / 48

HDO9000 Getting Started Guide

REFERENCE

Warranty

NOTE:

THE WARRANTY BELOW REPLACES ALL OTHER WARRANTIES, EXPRESSED

OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS, OR ADEQUACY FOR ANY PARTICULAR PURPOSE OR
USE. TELEDYNE LECROY SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT OR OTHERWISE. THE
CUSTOMER IS RESPONSIBLE FOR THE TRANSPORTATION AND INSURANCE
CHARGES FOR THE RETURN OF PRODUCTS TO THE SERVICE FACILITY.
TELEDYNE LECROY WILL RETURN ALL PRODUCTS UNDER WARRANTY WITH
TRANSPORT PREPAID.

The product is warranted for normal use and operation, within

specifications, for a period of three years from shipment. Teledyne LeCroy

will either repair or, at our option, replace any product returned to one of

our authorized service centers within this period. However, in order to do

this we must first examine the product and find that it is defective due to

workmanship or materials and not due to misuse, neglect, accident, or

abnormal conditions or operation.
Teledyne LeCroy shall not be responsible for any defect, damage,

or failure caused by any of the following: a) attempted repairs or

installations by personnel other than Teledyne LeCroy representatives; b)

improper connection to incompatible equipment; or c) for any damage

or malfunction caused by the use of non-Teledyne LeCroy supplies.

Furthermore, Teledyne LeCroy shall not be obligated to service a product

that has been modified or integrated where the modification or integration

increases the task duration or difficulty of servicing the instrument. Spare

and replacement parts, and repairs, all have a 90-day warranty.
The instrument's firmware has been thoroughly tested and is presumed

to be functional. Nevertheless, it is supplied without warranty of any kind

covering detailed performance. Products not made by Teledyne LeCroy

are covered solely by the original manufacturer's warranty.

Support

Online Documentation

Online Help is available by selecting

Support > Dynamic Help

from the

oscilloscope display menu bar. You can also select

Support > OneTouch

Help

for a demonstration of MAUI with OneTouch.

Teledyne LeCroy publishes a free Technical Library on its website at

teledynelecroy.com/support/techlib

. Manuals, tutorials, application

notes, white papers, and videos are available to help you get the most out

of your Teledyne LeCroy products.
The

HDO9000 Oscilloscopes Operator’s Manual

can be downloaded from

teledynelecroy.com/web/hdo8000-manual

. This PDF document contains

more extensive operating procedures than are found here.
The Datasheet published on the product page contains the detailed

product specifications.

Technical Support

Registered users can contact their local Teledyne LeCroy service center

to make Technical Support requests by phone or email. For a complete

list of offices, visit

teledynelecroy.com/support/contact

You can also submit Technical Support requests via the website at

teledynelecroy.com/support/techhelp

Windows License Agreement

The XStreamDSO oscilloscope application runs on the Microsoft Windows

operating system. Teledyne LeCroy’s agreement with Microsoft prohibits

users from installing third-party software on HDO9000 oscilloscopes that

is not relevant to measuring, analyzing or documenting waveforms.

Содержание HDO9000
















































Результаты поиска

Содержание HDO9000

Отзывы:

Похожие инструкции для HDO9000

Бренды по названию

Популярные бренды

Teledyne Lecroy HDO9000, Руководство по началу работы

Результаты поиска

Содержание HDO9000

Отзывы:

Похожие инструкции для HDO9000

Бренды по названию

Популярные бренды