3
CH1
CH2
CH3
CH4
CH5
CH6
CH7
2- During the sound, press the push-button which
has to be memorised; the memorization is indicated
by the quick flash of the led and by quick beeps.
CH1
CH2
CH3
CH4
telecomando
transmitter
1- Press the push button
P1 twice and
hold
it down, the led flashes and the
buzzer makes a beep each time you
press; at the end the led remains lit and
the buzzer makes a continuous sound.
P1
led
1- Press the push button
P1 once
and hold
it down, the led flashes
and the buzzer makes a beep each
time you press; at the end the led
remains lit and the buzzer makes a
continuous sound.
2- During the sound, press one push button,
of the 7-channel transmitter which has to be
memorized, the memorization is indicated by
the quick flash of the led and by quick beeps.
All the push-buttons of the transmitter are
automatically memorized.
once
and hold
P1
led
5- TRANSMITTER MEMORIZATION
ATTENTION: The first transmitter can only be memorized using the receiver.
In the first 4 push buttons it is possible to memorise 4 different light intensity values.
With the push buttons CH5 and CH6 it is possible to adjust the light intensity and with push button CH7
the light will turned off.
5.1- To memorise 7-channel transmitters - Complete
available only for 7 or 42
channels transmitter
Luminosity at 100%
Luminosity at 75%
Luminosity at 50%
Luminosity at min
Dim +
Dim -
OFF: turn off the light
Luminosity at 100%
Luminosity at 75%
Luminosity at 50%
Luminosity at min
CH5 Dim +
CH6
Dim -
CH7 OFF:
turn off the light
5.2- To memorise one transmitter push-button with on/off/dimmer function
with short impulses (<800 ms.) it turns the light on and off, by holding it pressed, it increases or
decreases the intensity.
twice
and hold
If you change the type of load it is necessary to reset the light intensity values
memorized in the first 4 push-buttons of the 7-channel transmitters.
