7
1- Press the push button
P1
seven times
and hold it down for 10sec.;
(the led flashes and the buzzer makes a beep each time you press)
the led will flash quickly and the buzzer will make quick beeps.
At the end the led remains lit and the buzzer makes a continuous sound.
Release the button.
2- During the sound, press the push-button
which has to be deleted; The led remains
lit and the buzzer makes a continuous
sound.
P3
3- During the sound press
the push-button of the
new
transmitter
which has to be
memorised; the memorization
is indicated by the quick flash
of the led and by quick beeps.
memorized
transmitter
memorized
transmitter
new transmitter
1- Press the push button
P1
six times
and
hold it down, the led flashes and the buzzer
makes a beep each time you press; at the
end the led makes a slow flash and the
buzzer makes slow beeps.
P1
led
P1
led
The new transmitter will have the same functions of the transmitter used for its memorization.
1- Press the button
P3
located
inside the
already memorized
transmitter
. The led remains
lit and the buzzer makes a
continuous sound.(the push button
P3 is locate inside the transmitter,
see transmitter manual)
2- Within 5 seconds press a push
button of the
already memorized
transmitter
which has to be copy
the function. The led and the
buzzer turn off for 1 sec, and then
they turn on for 5 seconds.
8.1- TO DELETE all transmitters
8- TO DELETE a transmitter
7- To copy a function of transmitter push-button to a new transmitter
6 times
and hold
7 times
and hold
new transmitter
