15
Operating Characteristics
Optical
Wavelength:
1300 nm (standard), 1550 nm (optional),1550 nm dFB
(optional) or CWDM wavelengths (optional) designated at
time of purchase.
Fiber:
Single mode over a maximum of 30 km.
Optical Data Rate: 2.488 Gb/sec
Optical Source
Laser diode
Link margin:
15 db
Distance
@1310nm
30 km max
@1550nm
5 km max (dispersion limited)
@1550nm DFB
40 km max
Video and Data
NTSC,PAL and SECAM signals at any of the 8 signal channels. Adder data at
The 9
th
port. (Adder 161 and 882i ONLY)
Interface
RS-170, NTSC, PAL, SECAM
Input/Output Impedance
75 Ohm
Video Signal to Noise Ratio
> 70 dB
Frequency Response
± 0.20 dB
(5 Hz to 6 MHz)
Differential Gain
<=1.0%
Differential Phase
<=0.4 degrees
Chrom-Lum Delay
<= 10 nS NTSC, <= 15 nS PAL
Power Requirements
Voltage:
12 to 24 VDC
Current:
< 1.5 Amp
Power:
< 20 watts
NOTE:
Although the units will operate at 12 VDC, 13.8 VDC is required to charge
the internal UPS battery. Absolute maximum voltage is 30 VDC.
Equipment damage may occur at higher voltages.
Mechanical/Environmental
Dimensions (L x W x H)
16.7” x 10.5” x 1.75”
Weight, each unit
5 lbs
Connectors
Electrical
BNC
Optical
ST (standard)
Temperature Range
- 20C to + 55C case temperature
Humidity Range
0 to 95%, non-condensing
