5
Laser Safety
WARNING!
Class 1 laser. Do not look into a fiber port or connector.
Laser Radiation
This TX unit contains a CDRH Class 1 laser device. Although this means it is eye
safe, you must avoid looking directly at, or staring into, the laser bean located on
an optical connector or on the end of a fiber.
Infrared radiation is produced at the fiber connection port on the rear of the TX
unit and at the end of any unterminated optical fibers that are attached to this
port. Avoid any direct exposure to the light that comes from these sources.
Do not power up the unit when no fiber is attached to the fiber port.
There are no user adjustments inside the Diamondback2. Do not attempt any
type of service to this instrument other than any as instructed this manual. Refer
all servicing to Telecast Fiber, Inc.
FCC Part A Manual Notice
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and
can radiate radio frequency (RF) energy and, if not installed and used in
accordance with this instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct such interference at
their own expense.
WARNING CE
This is a Class A product. In a domestic environment this product may cause
radio interference.
