TeleAdapt P
owerHub USB
™
|
Installation Guide
TeleAdapt P
owerHub USB
™
|
Installation Guide
10
11
Mini-B USB socket
for passthrough
Step 3 (applies to 7533 variants only)
Plug a USB cable from your USB host to the Mini-B USB socket on
the bottom rear of the PowerHub USB.
If it is intended to power a device from the PowerHub USB then
also plug in the USB Type A plug from this device into the Type A
USB socket on the bottom rear of the PowerHub USB. Note that
the maximum current that can be drawn from this socket is 1A.
TA-7533 Rear USB Connections.
Step 4 (applies to non-US versions only)
Plug the supplied power cord into the interconnect socket that is on
the short stub cable at the rear of the PowerHub USB.
Step 5
Plug the power cord into the socket on the wall.
Fitting PowerHub USB through the Cut Out.
Step 6
Lean the PowerHub USB on the bottom of the cutout in the furniture
and push it into the cutout by rotating it slightly.
Step 7
Fasten the 4 cross head screws to fix the PowerHub in the furniture.
Step 8A (applies if using the ‘Classic’ trim)
Slide on the end caps (silver or black as required). Make sure the
arrowhead on the rear of the end caps is nearest the PowerHub USB
to ensure the end caps cannot be easily removed.
Step 8B (applies if using the ‘Slimline’ trim)
Align the selected trim (black or metallic) with the PowerHub USB
ensuring that the 2 small cutouts on the trim are on the bottom.
Press firmly and evenly to clip the trim into place.
Installation is now complete.
USB Type A Socket
1A max
